Veratron OceanLink 4.3, Руководство пользователя

Страница: 39 / 88

TROUBLESHOOTING
A2C15587600
TROUBLESHOOTING
OCEANLINK DISPLAY
Problem Root cause Solution
The values
displayed are not
as expected. Incorrect sensor
configuration. Check the configuration in the Sensors menu.
Sensor connected incorrectly. Check the connection, refer to the Installation
Instructions.
The NMEA 2000 network
backbone has not been
created correctly. Check the connections and that there is a
termination at both the beginning and end of the
backbone.
“---” is displayed
for a certain data
or the pointer
blinks in the
NavDash layout. The data is not available on
the network. Check that the sensor is functioning correctly.
Sensor not connected. Connect the sensor, refer to the Installation
Instructions.
The NMEA 2000 network
backbone has not been
created correctly. Check the connections and that there is a
termination at both the beginning and end of the
backbone.
The same data is
displayed with two
different alternating
values. Incorrect sensor
configuration.
Two different sources are
sending the same data on
NMEA 2000. Check the engine/tank IDs (Show value as) in the
sensor configuration.
“No MediaBox
connected”
MediaBox is not connected
to the NMEA 2000 network
or to the power supply. Check the connection of the MediaBox unit.
“MediaBox not
powered” MediaBox is connected but
off. Turn on the MediaBox, see “MediaBox use”.
EASYLINK 52 MM GAUGES
Problem Root cause Solution
The indicator is
backlit, but the
pointer does not
move. Data not received by the
OceanLink display (master). Check that the 52 mm indicator is compatible with
the master. If it is, check that the data is present on
the master display.
The pointer does
not move, and the
indicator is not
backlit. Master not powered Check the connections of the master.
Connect the power supply.
No 52 mm chain indicator is
connected to the master. Connect a 52 mm indicator to the master.