Veratron OceanLink 4.3, Руководство пользователя

Страница: 26 / 88

SYSTEM SETTINGS
A2C15587600
Setting Description Possible values / commands
Reset >
Reset MediaBox Only available with a MediaBox
device connected.
The MediaBox settings are
reset to factory default.
•
Yes
•
No
Demo mode Demo mode activation.
Simulated data are NOT sent
on NMEA 2000.
Note: the demo mode will
remain active after the unit is
restarted.
• On: display data are simulated. The simulation is
sent on EasyLink satellites too.
•
Off: demo mode is off.
UNITS
Setting Metric Imperial Nautical Custom
Distance km mi nm km, mi, nm
Boat speed kmh mph kn kmh, mph, kn
Wind speed kmh kn kn kmh, kn, m/s, bft
Depth m ft ft m, ft
Pressure bar psi psi bar, psi, kPa
Fuel L gal gal L, gal
Fuel flow L/h gph gph L/h, gph
Temperature °C °F °F °C, °F
CHANGE THE BRIGHTNESS OF THE DISPLAY
There’s a shortcut to change the brightness of the display. The change affects the set day or night mode.
•
Press and hold the buttons UP and DOWN until the menu Illumination appears.
•
Change the illumination brightness with the buttons UP and DOWN.
•
Confirm and close the menu with ENTER
•
To exit the menu without saving the changes press the MENU