Verathon BladderScan i10 Скачать руководство пользователя | Manualshive

Страница: 57 / 96

background image

49

Operations & Maintenance Manual: Using the System

0900‑5005 REV‑00

PROCEDURE 3. EXPORT SAVED EXAMS

Use this procedure to move exams from the system’s internal memory to an external USB drive.

By default, saved exam results are retained in the system’s internal memory. When you insert a USB drive into
the console, the system immediately begins reading the new drive for saved exam results. If no exams have
previously been saved to the external drive, the Saved Exams screen appears blank. However, exam results
in the system’s internal memory are not lost, and you can export them to the new drive. After exporting the
exams, the system removes them from its internal memory.

Exams are saved with unique file names, so that exporting new exams does not overwrite exams already
stored on the USB drive.

Exported exam information is stored in PDF format, so that it can be viewed on other devices. Each exam
document is stored in a separate folder on the USB drive and includes the following information:

•  Patient information
•  C‑mode view of the scan (if the C‑mode crosshairs image is enabled in reports)
•  B‑mode views of the scan (if B‑mode images are enabled in reports)

1. Insert a USB drive into an available USB port on the console.

2. If the system displays a message advising you to check the USB drive for damage, remove the drive from

the port. Repeat Step 1 using a different USB drive.

3. On the Home screen, tap

Saved Exams

.

4. If a keypad appears, key in the PIN for Saved Exams, and then tap

Enter

.

5. On the Saved Exams screen, tap

Export Exams

.

6. On the verification screen that appears, tap

YES

to confirm you want to move exams stored on the

console to the USB drive. Do not remove the drive until export is complete.

«
...
55
56
57
58
59
...
»

Содержание BladderScan i10

































































































Отзывы:

Нет отзывов

Похожие инструкции для BladderScan i10

Бренд: UnionSpecial Страницы: 56

Бренд: Taylor Made Страницы: 2

Бренд: York Fitness Страницы: 18

Бренд: Safco Страницы: 2

Бренд: Omni Страницы: 193

Бренд: Modulate Страницы: 2

Бренд: 1010music Страницы: 2

Бренд: 1010music Страницы: 4

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 20

Бренд: Samson Страницы: 2

Бренд: Gaspardo Страницы: 44

Бренд: Fast Страницы: 60

Бренд: Additel Страницы: 107

RZN 43-E Series

Бренд: D+H Страницы: 2

MIAMI J ADVANCED

Бренд: Össur Страницы: 35

Бренд: Össur Страницы: 38

Бренд: Össur Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды