Verathon BladderScan i10, Руководство по эксплуатации и техническому обслуживанию

Страница: 42 / 96

34
0900‑5005 REV‑00
PROCEDURE 5. CUSTOMIZE COST SAVINGS CALCULATIONS
The system provides default values for calculating the cost savings that result from scanning rather than
catheterizing patients. The default settings can be customized to reflect the rates and costs at your facility. To
change the currency used for cost savings calculations, see
“Configure General Settings” on page 28.
Total cost savings from using the system are based on this formula:
Total cost savings = (Catheterizations avoided × Catheterization costs) + (UTIs avoided × UTI costs)
1. On the Home screen, tap
Settings
, and then tap
Show Savings
.
2. On the Show Savings tab, tap Configure Savings .
3. On the Configure Savings screen, tap a field to update, and then enter new values. Numeric fields accept
decimal input but round to the nearest whole number.
• UTI Rate —Select the rate of urinary tract infections (UTIs) resulting from catheterizations.
• UTI Cost —Select the cost per UTI at your facility.
•
Catheterization Cost
—Select the cost per catheterization procedure.
•
Catheterization Volume
—Select the volume threshold for catheterization. Scans below the volume
threshold are not used in cost savings calculations.
Note: The Reset Calculations button restarts savings calculations as of the date this button is selected.
Tapping this button is not required to update savings values.
4. When you are finished, tap
Back
twice. This saves your settings and returns the console to the Home
screen.