Verathon AORTASCAN AMI 9700, Руководство по эксплуатации и техническому обслуживанию

Страница: 50 / 88

42
ASSEMBLE THE MEdICAL CART
1. Insert the five casters into the medical cart base, positioning the brake casters on opposite ends of the
base.
2. Insert the post into the square relief on the underside of the medical tray.
3. Insert the four screws through the bracket on the top of the post into the molded inserts in the medical
tray and tighten securely.
4. If you want to permanently attach the post to the wheeled base, refer to Step 6 through Step 11.
If you want the ability to disassemble the medical cart at a later date, place the tray assembly with the
post into the wheeled medical cart base.
5. Place the AortaScan into the foot prints on the medical tray.
If you want to secure the instrument to the medical cart, refer to Step 13 through Step 15.
PERMANENTLY ATTACH THE POST TO THE WHEELEd BASE (OPTIONAL)
6. Place medical cart base on level ground.
7. Open the two tubes of Loctite 680 by snapping off the tips of the tubes.
8. Apply the Loctite 680 all around the tapered portion of the post. Use all of the contents of both tubes.
Complete coverage of the tapered portion is not necessary as the Loctite will spread upon insertion into
the base.
9. Slide the post into the hole in the base with a twisting motion and press down firmly.
10. Wipe off excess Loctite with paper towel and discard towel as waste.
11. Allow post and base to sit undisturbed for 3 hours.
ATTACH THE ACCESSORY BASKET (OPTIONAL)
A universal accessory basket is available for the medical cart to provide additional storage capacity.
12. Follow the manufacturer’s instructions for attaching the accessory basket to the pole.
Figure 14. Universal Accessory Basket