VERACITY
COLDSTORE
|
CS
TORE
15-3U
QUICK START GUIDE |
REV 3.0.
3
|
October
201
8
| 7
Select
IP Address 1
010.000.000.140
IP Address 1 corresponds to the ETH1 connection. Press Cancel at any time to move back up the menu
hierarchy. Pressing Cancel three times will return to the default (general status) display.
See the COLDSTORE User’s Guide for full details of the front panel menu system and control.
K)
COLDSTORE Set up and Maintenance
S
oftware - SITESCAPE
SITESCAPE is a software application which works with all configurable Veracity network devices.
For COLDSTORE, SITESCAPE can be used to set up, apply firmware upgrades, obtain status and view
diagnostics. The latest version of SITESCAPE and COLDSTORE system firmware can be obtained from
Veracity’s download site
veracitydownloads.com
.
Please note that SITESCAPE requires Microsoft .NET Framework. The latest versions of Windows
desktop operating systems include the Framework. If the Framework is not present, then it will be
downloaded from Microsoft over the internet during the installation.
During the installation or operation of SITESCAPE a network protection application such as a firewall
may notify you that network access is blocked for SITESCAPE. If prompted or otherwise, please choose to
allow the SITESCAPE full access to the network. Note also that some network protection applications may not
notify you that access has been blocked. If you repeatedly fail to access the COLDSTORE using SITESCAPE
consider checking the configuration of your firewall and ensure that the SITESCAPE has full, unblocked
network access.
For more information about installing and using SITESCAPE, see COLDSTORE User’s Guide.
Installing SITESCAPE
To install SITESCAPE on your computer:
1
Download the latest SITESCAPE installer compressed archive from
http://veracitydownloads.com/Home/Perma?code=SITESCAPE_LATEST
.
2
Extract the contents of the archive to a temporary folder.
3
Right-click the executable application file and choose
Run as Administrator
to begin the
installation.
For Windows 8.1 or Window 10, if Windows SmartScreen is enabled, click the
More info
link then
click
Run Anyway
.
If Window User Account Control is enabled, click
Yes
when prompted.
The Licence Terms and Conditions dialog window is shown.
4
Scroll through the licence terms and conditions and, if you agree with them, check the box against
I agree to the license terms and conditions
. If you do not agree, click
Close
to abandon
installation of SITESCAPE.
To change the default installation location for SITESCAPE on your computer, click
Options
. In the
Setup Options dialog, either type the full folder path to your preferred installation location into the
Install location
box, or click
Browse
to use the Folder Browser dialog to help specify the
location. In either case, click
OK
on the Setup Options dialog to use the chosen installation
location, or click
Cancel
to use the default installation location.
Click
Install
to begin SITESCAPE installation.
The Setup Progress window is shown. You may be presented with other windows or dialogs not
controlled by SITESCAPE if your computer has specialist protection software installed. Follow the
