5
R
5. Adequate water flow.
This manual provides the information needed to meet these requirements.
Installation Location
CAUTION!
1. DO NOT install the heat pump near to hazardous materials and places.
2. DO NOT install the heat pump under deep sloping roofs without gutters which
will allow
3. Place the heat pump on a flat slightly pitched surface, such as concrete or
fabricated slab.
This will allow proper drainage of condensation and rain water from the base of the
unit. If possible, the slab should be placed at the same level or slightly higher
than the filter system/equipment.
application and installation procedures completely before continuing
Review all
the installation.
rain water, mixed with debris, to be forced through the unit.
