21
R
7. Keep inspecting power and electrical components’ wiring to make sure their
normal
operation.
8.
All the safety protection devices have been
pre
set by manufacturer ;
please refrain
from changing
these settings. If any changes are needed, please contact the
authorized
installer/agent.
9. I
f the heat pump is installed under roof without a gutter, ensure that all measures
are taken to prevent excessive water from flooding the unit.
10. Do not use this heat pump if any electrical part has been in contact with water.
Contact a authorized installer/agent.
11. If the increase of power consumption is not due to cold weather, please consult
with the local authorized installer/agent.
12. Please turn off the heat pump and disconnect it from the mains power supply,
when not in use for a prolonged period of time.
Troubleshooting
Use the following troubleshooting information to resolve issues/problems with your
heat pump.
WARNING — RISK OF ELECTRICAL SHOCK OR ELECTROCUTION.
Ensure that all high voltage circuits are disconnected before commencing heat
pump installation. Contact with these circuits could result in death or serious
injury to users, installers or others, due to electrical shock and may also cause
damage to property.
DO NOT
open any part of the heat pump as this may result to electrocution.
1. Keep your hands and hair clear of the fan blades to avoid injury.
2. If you are not familiar with your heater:
a) DO NOT
attempt to adjust or service the unit without consulting your authorized
installer/agent.
b) PLEASE
read the complete Installation and/or User’s Guide before attempting to
operate service or adjust the heater.
IMPORTANT:
Turn off the mains power supply to the heat pump prior to attempting
service or repair.
