thinpar 64 users Manual
4
2. SAFETY INSTRUCTIONS
Please read these instructions carefully. It includes important information
about the installation, usage and maintenance of this product.
•
Please keep this User Manual for future reference.
•
Make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to
is not higher than that stated on the decal or rear panel of the fixture.
•
This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain
or moisture.
•
Make sure there are no flammable materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20” (50 cm) from adjacent
surfaces. Be sure that no ventilation slots are blocked.
•
Always disconnect from the power source before servicing or replacing the fuse and be sure to replace
with same type fuse.
•
Secure fixture to fastening device using a safety chain.
•
Maximum ambient temperature is 104° F (40° C). Do not operate the fixture at temperatures higher
than this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit yourself.
•
Never connect the device to a dimmer pack.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Never carry the fixture directly from the cord. Always use the hanging/mounting bracket.
•
Avoid direct eye exposure to the light source while it is on.
