11
CONNECTIONS
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio
amplifier and external speakers.
Connect the right (red) and left (white) audio
OUTPUT from this unit to the right (red) and left
(white) audio INPUT on your amplifier. Refer to
your amplifier’s user manual for more information.
Note :
To control the audio, both the TV and the amplifier
must be turned on, and the volume of the amplifier
must be set above 0, or you will not hear any
sound.
If you want to hear the sound from the amplifier
only. Press the
Volume –
button of TV to decrease
the volume or press the
MUTE
button of remote
control to turn off the sound.
* May require a subscription for
receiving HD channels, check
with your cable/satellite service
provider for details.
CONNECTING A HIGH-DEFINITION (HD) SOURCE
High-Definition (HD) Devices with component video output must be connected to the YUV input:
Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on
this unit (Component video cable not included).
Connect the right (red) and left (white) audio output from the source to the right (red) and left
(white) input on this unit (Audio cable not included).
Make sure you connect both audio and video from the same source to YUV IN.
Note :
When connecting a DVD player to the television, the picture resolution is solely depen-
dent upon the resolution supported by the DVD player attached. DVD Player resolutions vary from
480i to 1080i, and this television can support DVD players up to a maximum resolution of 1080i.
PLV36190_ib_eng_1-14_wDVI.pmd
18/01/2007, 17:01
11
