background image

3

www.ventilation-system.com

SAFETY REQUIREMENTS

•  Please read the user’s manual carefully prior to installing and operating the unit.
•  All user’s manual requirements as well as the provisions of all the applicable local and national 

construction, electrical, and technical norms and standards must be observed when installing 
and operating the unit.

•  The warnings contained in the user’s manual must be considered most seriously since they 

contain vital personal safety information.

•  Failure to follow the rules and safety precautions noted in this user’s manual may result in an 

injury or unit damage.

•  After a careful reading of the manual, keep it for the entire service life of the unit.
•  While transferring the unit control, the user’s manual must be turned over to the receiving 

operator.

UNIT INSTALLATION AND OPERATION SAFETY PRECAUTIONS

•  Disconnect the unit from 

power mains prior to any 
installation operations.

•  Unpack the unit with care.

•  The unit must be grounded!

•  While installing the unit, follow 

the safety regulations specific 
to the use of electric tools.

•  Do not change the power 

cable length at your own 
discretion. 

•  Do not bend the power cable. 
•  Avoid damaging the power 

cable. 

•  Do not put any foreign objects 

on the power cable.

•  Do not lay the power cable of 

the unit in close proximity to 
heating equipment.

•  Do not use damaged 

equipment or cables when 
connecting the unit to power 
mains.

•  Do not operate the unit 

outside the temperature range 
stated in the user’s manual. 

•  Do not operate the unit 

in aggressive or explosive 
environments.

Содержание AOW 25

















Отзывы: