Ventrac LX423, Руководство оператора, Страница: 5 / 49

INTRODUCTION
Introduction - 5
Product Description
The Ventrac Model LX423 Snow Blower is designed for the sole purpose of blowing snow. It is a powerful,
high capacity, two stage snow blower that moves large amounts of snow quickly.
The snow blower’s large 16” (40.6 cm) auger funnels the snow into the high speed fan which throws the
snow up to 40 feet (12.1 meters) away from the operation area.
The discharge chute is hydraulically controlled. The operator controls the direction of the discharge from
the operator’s seat of the power unit.
An optional 12 volt actuator kit (70.8025) can be purchased to allow the operator to control the throw dis-
tance of the snow blower from the operator’s seat of the power unit.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-
ing the operator’s manual will help you become familiar with each specific piece of equipment. Under -
standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
INTRODUCTION
LX423
Accessories
Item Description Part Number
12 Volt Actuator Kit* 70.8025
*Power unit must be equipped with a 12 volt front switch & plug.
Power Unit
Accessories
Item Description Part Number
12 Volt Switch & Plug Kit (LT3000 Serial # 1001-1346) 70.3008
12 Volt Switch & Plug Kit (LT3000 Serial # 1347-) 70.3007
12 Volt Switch & Plug Kit (LE3100/LE3200) 70.3016
Weight Transfer for LE3100 Power Unit 70.3014
Weight Transfer for LT3000 Power Unit 70.3023
V
enture Products Inc. is pleased to provide you with your new
Ventrac snow blower! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility as you use your snow blower. Please visit our web
site, or contact your authorized Ventrac dealer for a complete
list of items available for your new snow blower.