Ventrac LX423, Руководство оператора, Страница: 15 / 49

Operation - 15
Operational Control Locations
Use the following images to help identify the locations
of operational controls. The letter next to each control
can be referenced to the list that follows these images.
A
B
C
A. Discharge Chute Rotation
(Secondary S.D.L.A. Lever)
B. Discharge Chute Adjustment Link
C. Optional Discharge Chute Deflector
Actuator Control
Discharge Chute Rotation (A)
(Secondary S.D.L.A. Lever)
The secondary S.D.L.A. lever on the power unit con-
trols the hydraulic rotation of the discharge chute.
The discharge chute can be angled from left to right
(180 degrees of rotation) to discharge snow in the
desired direction.
Discharge Chute Adjustment Link (B)
The discharge chute adjustment link controls the
angle of the discharge chute deflector. The angle of
the discharge chute deflector determines the dis -
tance that snow is thrown.
Optional Discharge Chute Deflector
Actuator Control (C)
This optional actuator replaces the discharge chute
adjustment link on the snow blower. It couples with
a 12 volt switch on the power unit, allowing the
operator to control the angle of the discharge chute
deflector from the operator’s seat.
The actuator is
D
controlled with a dash
mounted momentary
on toggle switch (D)
on the LE3100 and
LE3200 models.
The actuator is controlled
E
by momentary on switches (E)
on the optional 12V front SDLA
handle on LH3400 models.
OPERATIONAL CONTROLS