VENTEV INNOVATIONS BTRM200 Battery Test Remote Monitoring System – User Guide V1.0
41
2. You should now see a Trap Receiver Tab in the main window of the MIB Browser.
3. Now, in order to see the SNMP traps coming in you need to throw the BTRM into an
alarm by removing one contact loop circuit at a time. There are various ways to
break the contact loop circuit depending on the BTRM configuration.
a. Door Switch
i. Push the door switch in and hold for approximately 10 seconds. This
simulates the enclosure door beeing closure.
ii. Release the door switch.
iii. In a few seconds you should see an SNMP message alert come into
the trap receiver in the MIB Browser.
b. AC/DC OK Indication
i. When you remove the AC power from the enclosure, you should see
an alarm on the BTRM.
