Draft 3
Printed: 09/07/2003
Page 14
doc: icu_kit_user_maunul_090703.doc
4.2 Changing the User Pin Code
It is recommended that the user code be changed immediately after completing the basic installation.
The user code is factory set to “1234”
.
Quick key sequence
User
enter new user
Detailed Explanation
Enter user
OK beep, display changes to
“
0 0
”
flashing
.
Display changes to
“
P
”
Display changes to
“
P 8
”
for 2 sec, then to four-bar pattern, to show that four digits
need
to
be
entered.
Enter new user
For each digit you press, one of the illuminated bars on the four-bar pattern will go
out. After pressing the fourth digit, unit gives OK beep.
The
display
changes
to
show
“
P 8
”
flashing.
Control unit stores the new user code and returns to
“day / unset”
mode.
The “ RESET”
key can be pressed
at any time to cancel the above procedure and return the control unit to
“day /
unset”.
D
C O
E
D
C O
E
D
C O
E
PG
FORWARD
PG
D
C O
E
P2
STORE
P2
STORE
8
8
