11
17
When you finish programming, press the button “PROG”. The room temperature will
appear on the display. You have just designed a heating system plan.
6 SWITCHING OFF THE DISPLAY
IMPORTANT
If you do not require a set time period, you must put the hour of this period at “00:00”.
As you can see, we have not defined a third period between saturday and sunday.
To switch off the display press the button:
00:00
00:00
Press
If you wish to illuminate the display again, press any search button:
This option is cancelled when the heater is programmed in the anti-freeze plan “PLAH”.
IMPORTANT
