4
6
1
3
2
1. TO PLACE
2. TO LET
3. TO PLACE
7.1 Then connected the power supply cord to a double pole isolating switch.
7.2 Make sure that the heater is perfectly fixed to the wall to avoid future risks.
IMPORTANT:
To have the heater perfectly fixed to the wall,
screw COMPLETELY the 6 x 50 mm screws in
the upper part of the separators (Point 6 - Fig. 4)
.
To avoid problems it is necessary to keep a minimum distance of 15 cm between the heater
and any combustible material such as curtains, furnitures, etc.
7
5
3. TECHNICAL INFORMATION
- Manual programming function.
- 7 pre-set programmes.
- Configure your own heater program.
- Comfort/ economic/ antifreeze modes.
- The controls can be locked.
- Weekly programming.
- ON/ OFF Luminous display.
-
This heater must be used on an ~ supply only and the voltage marked on the heater must
correspond to the supply voltage.
- Before wiring, please note that the wires in this mains lead are coloured inaccordance
with the following code:
2 SCREWS
FIXED HEATER
3. HEATER FUNCTIONS
4. ELECTRIC CONNECTION
Blue
Brown
Green - Yellow
Power Cord
240 V Supply
NEUTRAL
LIVE
EARTH