Maintenance
Sentinel Kinetic MVHR Installation & Commissioning
34
Spares
The following spares can be ordered from Vent-Axia:
Description
Part No 200ZP,
200ZPH & 200ZPM
Filters (2 per pack)
407584
Heat Recovery Cell
407585
Motor assembly supply
407586
Motor assembly extract
407688
Control PCB
449527
Temperature sensor kit (2 per pack)
407587
Wired remote controller (complete with 15 metre control cable)
443283
Filter Cover (2 per pack)
407588
Sleeve Nuts and Washers pack of 6
407589
Lift Heat Exchanger from Lower Case
Wash the inside of the Lower case and Heat Exchanger in warm
water using Milton Fluid or equivalent and dry thoroughly.
Fan End
Label
Replace Heat Exchanger in Lower Case ensuring that it is orientated
correctly, following directions on label. The label should be visible
and the arrow should point towards the fan end of the unit. Failure to
do this will affect the unit’s performance
Re attach the lower case to the unit and fasten the screws
Heat Exchanger