8. GREASE FILTERS
1. To remove the grease filters, pull down on the metal latch tab and
tilt each filter downward to remove.
2. To install the grease filters, align rear filter tabs with slots in the
hood. Pull down the metal latch tab, push each filter into position
and release. Make sure filters are securely engaged after installation.
-7-
9. LIGHT BULBS
10. OPERATION
The hood is operated using the push button on the front panel.
The light switch turns the lamps on and off.
The blower switch turns the blower on to three speed settings:
LOW SPEED
MEDIUM SPEED
HIGH SPEED
OFF
LOW
MED.
HIGH
LIGHT
This range hood requires two UL approved halogen bulbs
(Type JC, 12 V, 20 W).
To change bulbs:
1. Gently push the rim upward and turn counterclockwise to
disengage the light bulb cover.
2. Replace with Type JC, 12V, 20 W Max, G-4 Base halogen bulb.
3. Replace the light bulb cover by pushing the rim upward and
rotating the light bulb cover clockwise.
WARNING
Always switch off the electrical supply before carrying out
any operation on the appliance.
!
WARNING
In order to prevent the risk of personal injury, the halogen
lamps must be cooled down before removing them.
WARNING
Bulb may be hot. Do not touch replacement bulb with bare
hands!
!
FAN CONTROLS
ON/OFF
!
LIGHT BULB COVER
