-4-
3. PREPARE THE INSTALLATION
Unpack hood and check contents.
You should receive:
1 - Hood
1 - Decorative Flue Assembly (lower and upper flues)
1 - Parts Bag containing:
1 - Lower Flue Mounting Bracket
1 - Hood Mounting Bracket
1 - Upper Flue Mounting Bracket
4 - Decorative Flue Bracket Screws (#8 x 7/16”)
7 - Mounting Screws (#8 x 1¼”)
7 - Drywall Anchors
2 - Washers
4 - Aesthetic Washers
4 - Mechanical Flat Head Screws (M4 x 0.7”)
2 - Aluminum Grease Filters
1 - Installation Manual
DECORATIVE
FLUE
HOOD MOUNTING
BRACKET
UPPER FLUE
MOUNTING BRACKET
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must
be plugged into an outlet that is properly installed and grounded.
Set the electrical power supply within the space covered by the decorative flue.
Position the outlet offset so that the power cord will not interfere with the round
duct. Place the outlet at a maximum distance of 33-7/16” (850 mm) from where
the cord exits from the hood (see illustration alongside). Make sure this does not
interfere with a mouting bracket fastening area or with the decorative flue (where
the flue touches the wall).
4. WIRING INSTALLATION
WARNING
Electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards. This range
hood must be properly grounded. Turn off electrical power at service entrance before wiring.
!
WARNING
Improper grounding can result in a risk of electric shock. Consult a qualified electrician if the grounding instructions
are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not use an
extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.
!
LOWER FLUE
MOUNTING BRACKET
33
7
⁄
16
”max.
