5
2. PREPARE
THE
INSTALLATION
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or
damaged, contact the manufacturer.
Make sure that the following items are included:
- Hood
- Accessories
• Decorative flue assembly (lower and upper flues) (IC700 and IC700ES models only)
• Upper flue mounting bracket (taped inside the hood) (IC700 and IC700ES models only)
• Hood mounting bracket (taped inside the hood)
• 3¼” x 10” Adapter/Damper (for horizontal or vertical discharge) taped inside decorative flue
(IC700 and IC700ES) or on the blower box (IB700).
• Bag of parts (taped inside the hood) including:
5 no. 8 x 1½” countersunk screws, 8 no. 8 x 3/4” screws, 2 no. 8 x 1/2” screws,
6 no. 8 x 3/8” screws, 6 drywall anchors, 3 washers, 2 foam squares.
If need be, discard extra parts.
Parts sold separately:
- Ducts, elbows, wall and roof caps. Refer to page 3 for a complete list of venting options and
model
numbers.
- Optional flue extension for 10-ft. ceilings model no. 19323.
- Glass panel for IC70030WG, IC70036WG, IC700ES30WG, IC700ES36WG, IB70030WG and
IB70036WG models (see service parts list on page 21).
- Transition 3¼” x 10” to 7” or 8” round duct.
NOTE: During installation, protect countertop and/or cooktop.
WARNING
!
When performing installation, servicing or cleaning the unit, it is recommended to wear
safety glasses and gloves.
1. INSTALL
DUCTWORK
(
CONT
'
D
)
3¼
IN
.
X
10
IN
. M
AXIMUM
D
UCT
L
ENGHT
R
OOF
OR
WALL
CAP
WITH
DAMPER
E
LBOW
(
S
)*
(90°
AND
/
OR
45°)
60
FT
.
1
0
50
FT
.
1
1
40
FT
.
1
2
M
AXIMUM
D
UCT
L
ENGHT
R
ECOMMENDED
TO
A
CHIEVE
80% E
XHAUST
EFFICIENCY
*S
TANDARD
ELBOWS
WITH
1”
INTERNAL
RADIUS
.
Refer to illustration at right to
locate duct opening for horizontal
discharge (IC700 and IB700 only).
HK0059A
C
L
9¾”
3
3
⁄
16
”
11”
1
5
⁄
8
”
14
15
⁄
16
”
17
15
⁄
16
”
36”
WIDTH
HOOD
30”
WIDTH
HOOD
H
ORIZONTAL
DISCHARGE
