Venmar ISPIRA IB700 Series Скачать руководство пользователя страница 17

17

19. CARE

H

YBRID

 

FILTERS

Hybrid filters should be cleaned monthly. Remove hybrid filters by pushing them towards the back of 
the hood and flipping them downward. Use a warm detergent solution to clean the filters. Let them 
dry and reinstall them. Hybrid filters are dishwasher safe. Clean all-metal filters in the dishwasher 
using a non-phosphate detergent. Discoloration of the filter may occur if using phosphate detergent 
or as a result of local water conditions — but this will not affect filter performance. This discoloration 
is not covered by the warranty.

S

TAINLESS

 

STEEL

Do:

•  Regularly wash with clean cloth or rag 

soaked with warm water and mild soap or 
liquid dish detergent.

•  Always clean in the direction of original 

polish lines.

•  Always rinse well with clear water (2 or 

3 times) after cleaning. Wipe dry completely.

•  You may also use a specialized household 

stainless steel cleaner.

Don’t:

•  Use any steel or stainless steel wool or any 

other scrapers to remove stubborn dirt.

•  Use any harsh or abrasive cleansers.
•  Allow dirt to accumulate.
•  Let plaster dust or any other construction 

residues reach the hood. During 
construction/renovation, cover the hood to 
make sure no dust sticks to stainless steel 
surfaces.

    WARNING

!

Before servicing or cleaning the unit, switch power off at service panel and lock 
service panel to prevent power from being switched on accidentally. When the service 
disconnecting means cannot be locked, securely fasten a prominent warning device, such 
as a tag, to the service panel.

G

LASS

 

PANEL

Hot water with mild soap or glass cleaner is all that is usually needed.

When using mild soap, rinse with clear water. Wipe dry with a clean, soft cloth to avoid water marks.

Avoid when choosing a detergent:

-  Any cleaners that contain 

bleach.

 They will attack stainless steel.

-  Any products containing 

chloride, fluoride, iodide, bromide.

 They will deteriorate surfaces 

rapidly.

-  Any combustible products used for cleaning such as 

acetone, alcohol, ether, benzol

, etc. They 

are highly explosive and should never be used close to a range.

18. LED LIGHTING

The lighting of this hood is produced by two LED modules (included).

    WARNING

Do not touch lamps during or soon after operation. Burns may occur. Cannot be replaced 
by any other type of light bulb or LED module.

!

Содержание ISPIRA IB700 Series























Отзывы: