10
V
ERTICAL
DISCHARGE
Mount the 3¼” x 10” adapter/damper to
the top of the hood using 2 no. 8 x 3/8”
screws (included). Seal the
adapter/damper to the hood using metal
foil duct tape.
7. INSTALL
THE
ADAPTER/DAMPER
(
CONT
'
D
)
HJ0065
S
CREW
LOCATION
8. WIRING
INSTALLATION
WARNING
!
Improper grounding can result in a risk of electric shock. Consult a qualified electrician if
the grounding instructions are not completely understood, or if doubt exists as to whether
the appliance is properly grounded. Do not use an extension cord. If the power supply cord
is too short, have a qualified electrician install an outlet near the appliance, in accordance
with all applicable codes and standards. Turn off electrical power at service entrance
before wiring.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for the electric current. This appliance is
equipped with a cord having a grounding wire with a grounding plug. The plug must be connected
to an outlet that is properly installed and grounded.
Position the outlet within the space covered
by the decorative flue (IC700 and IC700ES).
Place the outlet at a maximum distance of
24” from where the cord exits from the hood.
The center of the outlet must be positioned
at 3½” from the center of the future hood
location (as illustrated at right). Make sure this
does not interfere with a mounting bracket
fastening area or with the decorative flue
(where the flue touches the wall).
F
OR
BUILT
-
IN
INSTALLATION
(IB700
SERIES
),
GO
TO
SECTION
17.
HE0064A
