- 17 -
14.OPERATION (
CONT
’
D
)
G. L
IGHT
B
UTTON
/B
ACKLIGHTING
C
OLOR
(D
OUBLE
F
UNCTION
B
UTTON
):
i. This button allows four different lighting levels according to your needs. Press once for full
intensity, twice for intensity level
3
, three times for intensity level
2
and once more for
nightlight. To turn off the lights, press once more.
If desired, when the lights are on, press and maintain the light button for 1 second; lights will
be turned off and the light level in use will be memorized.
NOTE: When only lights are ON to any intensity and no interaction with the hood is detected
for a 10-second period, the 7 buttons backlighting will fade to its low intensity, acting
as a night light feature.
ii. When lights are off, pressing and holding this button for 2 seconds will switch the backlighting
color from white to blue or from blue to white (default backlighting color is white) and memorize
it. The button will flash three times to indicate that the color change has been made.
L
INK
L
OGIC
® N
ETWORK
COMPATIBILITY
Your CIS700 Series range hood can be linked to LinkLogic network, if installed in your house.
L
INK
L
OGIC
® L
INKING
I
NSTRUCTIONS
1.I
NITIALIZE THE
L
INK
L
OGIC DEVICE TO BE LINKED
Lift and release the
Set button tab, then push it for 3 seconds or until “beep” is heard. When
the tab is released the remote control, confirms initialization by turning ON the backlight of
the “
Room Light ON and Off” button. Press the “Room Light OFF” button to stop the
flashing. Initialization of the remote control is now completed.
2.A
CTIVATE THE
L
INK MODE OF THE RANGE HOOD
Push and hold button
E
for 3 seconds. After the 3-second hold, button
E
backlight blinks
3 times quickly (low to high intensity) and then all 4 speed levels backlights start to oscillate
between mid and low intensity.
L
INK FOR
L
INK
L
OGIC
™
MODEL NO
. ACW1WH
L
INK OF ANOTHER
L
INK
L
OGIC
®
DEVICE
Go back to the appropriate first step if
another LinkLogic device
needs to be linked.
Otherwise, to exit
Link mode, go to:
Exit the
Link mode of the range hood
S
TART THE
A
UTO
-L
INK PROCESS
OF THE RANGE HOOD
Press and release button
D
to start
the Auto-link process, all 4 speed
level backlights flash in rotation.
A
CTIVATE THE
L
INK MODE
OF THE
L
INK
L
OGIC
®
DEVICE
Push the
Light Off button of the
LinkLogic device for 10 seconds or
until its backlight flashes
(“beep” should also be heard).
HC0052
A
B
C
D
E
F
G
FAN
LIGHT
FAN
OFF
LIGHT
OFF
ROOM LIGHT
OFF
ROOM LIGHT
ON
HC005
3
S
ET BUTTON
3.E
XIT THE
L
INK MODE OF THE RANGE HOOD
Press and hold button
E
for 3 seconds. After the 3-second hold, button
E
backlight blinks
3 times quickly (low to high intensity) and it exits the
Link mode. Link mode remains activated
for 4 minutes if no other operation is done.
