VENGEANCE 2007 Hotrod Bones Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 78

background image

© 2007

American Hotrod Manufacturing, LLC • 2220 Eastridge Avenue Riverside, CA 92507

- 71 -

2,500-MILE MAINTENANCE

NOTE:

Proof of the 2,500-mile maintenance service is required to keep your warranty in effect

V

EHICLE

I

DENTIFICATION

N

UMBER

Change engine oil and oil filter and clean tappet screen.

Inspect transmission lubricant level and condition.

Inspect air cleaner and service as required.

Check and adjust primary belt as needed.

Check and adjust drive belt with motorcycle loaded (rider and any additional normal load).

Inspect brake pads and discs for wear.

Inspect oil lines and brake system for leaks.

Check brake fluid reservoir levels and condition. Add fluid as needed.

Check and adjust front brake lever.

Check and adjust rear brake pedal.

Check and adjust throttle and fuel enrichener operation.

Inspect fuel valve, lines, and fittings for leaks.

Check and adjust front and rear tire pressures and inspect tread and sidewall condition.

Check operation of all electrical equipment and switches.

Inspect and clean battery connections.

Inspect spark plugs and replace as needed (replacement at an additional charge).

Check stabilizer links and engine mounts.

Check and adjust engine idle speed.

Perform diagnostic test on ignition module, note readings for discussion with customer. (CA Only)

Clean debris from magnetic speed sensor on transmission.

Clean debris from neutral sensor switch.

Confirm operation and performance with road test

2,500-MILE MAINTENANCE SERVICE

DATE COMPLETED:__________ DEALER:______________________________
CUSTOMER:_______________________________________________________
MODEL:______________ YEAR:____________ MILEAGE:_________________
TECHNICIAN:______________________________________________________
TECH COMMENTS:_________________________________________________

__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________

«
...
69
70
71
72
73
...
»

Содержание 2007 Hotrod Bones















































































Отзывы:

Нет отзывов

Похожие инструкции для 2007 Hotrod Bones

Бренд: Racelogic Страницы: 2

Бренд: Sachs Bikes Страницы: 71

Бренд: AGV Страницы: 64

Бренд: zeeltronic Страницы: 10

Бренд: Zero Страницы: 290

SPORTTOURING ST4S

Бренд: Ducati Страницы: 313

Бренд: N-Com Страницы: 2

Бренд: UBCO Страницы: 27

SHERCO 50 SE 2022

Бренд: SHERCO Страницы: 226

Бренд: KTM Power Parts Страницы: 12

Бренд: Royal Enfield Страницы: 110

Бренд: Vanucci Страницы: 35

Бренд: Cobra Страницы: 2

Бренд: R&G Страницы: 6

Бренд: R&G Страницы: 6

Бренд: R&G Страницы: 8

Бренд: R&G Страницы: 17

Бренд: R&G Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды