S T / V T V E N D O R
•
3 5 6 8 3 5 6 7 3 5 6 6 3 5 6 5
•
18
4 2 2 0 5 5 7 R E V A
0
DIAGNOSTICS
(See CONTROL SYSTEM Programming Manual for more information)
0.0.2 AUTOMATED DOOR
Opens and closes the Delivery Lift box product door and indicates if the control board detects the motor cam switch to be in the
correct position.
STEP
DISPLAY
1
Press the ‘Service Mode’
button on the control board.
(Motor count)
2
Press
Diagnostics
3
Press
Peripherals
4
Press
to see current Auto Door position
Auto Door Closed
1-open 2-close * - exit
5
Press
- OPEN DOOR ,
-CLOSE DOOR
Auto Door Closed
1-open 2-close * - exit
6
Press
3 times to exit
Back to sales mode
NOTE:
The
display will show the current “Open” or “Closed” position while the Auto Door is moving to a new
position. If the
control board can’t determine an Auto Door motor position, the “Unknown” message will also appear.
IMPORTANT:
If the control board cannot determine the Auto Door position when the sales mode is entered or while in the sales
mode, the machine will be placed
Out of Service
.
0.0.3 DELIVERY LIFT TEST
Raises and lowers the Delivery Lift plate and indicates if the control board detects the motor cam switch to have the Delivery Lift
in the correct position.
STEP
DISPLAY
1
Press the ‘Service Mode’
button on the control board.
(Motor count)
2
Press
Diagnostics
3
Press
Peripherals
4
Press
Lift Down
1
–
up 2
–
down *--
exit
5
Press
- Raise the lift to top position ,
-Lower the lift
to the bottom (Home) position
Lift Down
1-UP 2-DOWN * - exit
6
Press
3 times to exit
Back to sales mode
NOTE:
The display will show “Lift Unknown” while the Delivery Lift is moving to the up or down position. If the control board
can’t determine a Lift motors cam position the “Lift Unknown” message will also appear and stay present.
IMPORTANT: Do not attempt to run the Delivery Lift Test diagnostic if the Delivery Lift Plate may be jammed. Manually correct
this issue before running test. Contact Vendnet Service at 1-800-833-4411 for assistance or more information.
