VendNet SM VI 3157, Руководство по обслуживанию

Страница: 41 / 48

SM VI, 3157, 3158, 3159, P/N 4211051
39
CARE & CLEANING
CAUTION:
Always disconnect power source before cleaning.
Cabinet Exterior
Wash with warm water and a mild detergent, rinse thoroughly and dry with a non-
abrasive, lint free cloth. Wax occasionally with a quality grade liquid or paste auto wax.
Minor scratches can be smoothed with rubbing compound, but deep scratches should
be touched up with paint to prevent rust. Plastic parts should be cleaned with non-
abrasive plastic cleaner. Jewelers <rouge” can sometimes be used to polish out
scratches in plastic.
Cabinet Interior
Remove power from machine. Wash with warm water and a mild detergent, rinse
thoroughly and dry with a non-abrasive, lint free cloth. Offensive odors may be
eliminated by adding baking soda or ammonia to the cleaning solution. Paint brushes
may be used to clean hard to reach areas such as cabinet and delivery box corners. A
damp sponge will pick up loose particles from the delivery box. The delivery box drain
tube is equipped with a screen, which can be removed for cleaning.
The vend motors and augers in the Snack Food Vendor require no lubrication. Spray
cleaners, lubricants or silicone may damage these moving parts. The nylon tray-rollers
need no lubrication but do require occasional cleaning for smooth operation. The vend
door and anti-cheat moving parts also require cleaning without lubrication. The main
door hinges should require no lubrication, provided the cabinet is installed level.
Occasional lubrication of the main door lock screw and lock nut with a quality lubricant,
such as lithium grease, will allow the locking mechanism to function more smoothly.
The electronic coin changer is designed to operate without lubrication and minimal
cleaning. Occasionally open the coin acceptor portion and wipe the exposed surfaces
with a damp cloth.
CAUTION:
Electronic or electrical components should be kept free of water or other
conductive liquids. Should any of these components be exposed to
liquids, rinse and dry thoroughly with forced air, heat or time before
restoring power to the machine.