Vendlet 05714038001056, Руководство пользователя

Страница: 32 / 36

PART 3 - Technical manual
32
TECHNICAL DATA
In accordance with the Medical Device Regulation (EU)
2017/745, the VENDLET systems are class I products.
VENDLET Basic
Product no. 6200000
Max. user weight 150 kg
Control unit:
Power supply SMPS 350W
Mains supply 100-240 Volt AC, 50/60 Hz
Power rating Max 350 W
Protection Class 1
IP class IPX6 Washable
Intermittence 10%, max 2 min / 18 min.
Output voltage 24 Volt DC
Weight:
Total system approx. 30 kg
Red side incl. actuator approx. 14,5 kg
Blue side incl. actuator approx. 14,5 kg
Control unit approx. 0,7 kg
Battery (accessory) approx. 0,7 kg
Length: 201 - 221 cm (telescopic)
Width: May be adapted to beds between
70 and 130 cm
Expected service life > 5 years
Noise level max. load 65 db(A)
Turning sheet:
Standard width and length 270 cm / 183 cm
Material 100 % cotton
Slide sheet:
Standard width and length 95 cm / 210 cm
Material 100% nylon
System service check Annually
VENDLET Basic
Battery (optional): Li-lon 2,25 Ah / 24 Volt DC
Duty Cycle: 5 %,
1 minute continuous use followed by
19 minutes not in use
Charging: With integrated charger in battery
Charging time: Approx. 10 hours
Recharging during storage: First recharge of the battery must be
no later than 12 months after produc-
tion date stated on the label. Hereaf-
ter the battery must be recharged at
least every 12 months.
Operating temperature: + 5 °C to + 30 °C
Storage temperature: - 10 °C to + 40 °C (+ 10 °C to + 25 °C
recommended) The batteries must be
stored in an applicable storage room
without direct sunlight
Relative humidity: 20 % RH to 80 % RH, non-condensing
Atmospheric pressure: 700 to 1060 hPa
IP class IPX6 Washable
Battery backup
Recharging during storage:
First recharge of the battery must be no later than 12 months
after production date stated on the label. Hereafter the bat-
tery must be recharged at least every 12 months.
DO NOT
• Heat or burn the battery
• Short circuit the battery
• Expose the battery to high impact
• Crush or puncture the battery
• Use batteries with signs of damage or corrosion
• Change or store the battery near combustible material
• Expose the battery to water or other liquids when un-
plugged
LED functionality
LED Indication of operating
Solid yellow Charging
No LED Light Fully charged
Flashing yellow Error during charging
Buzzer functionality
The buzzer will make a warning when a button on the hand
control is pressed and the battery capacity is low.