PART 2 - User manual
11
OPERATION
The turning sheet on VENDLET Basic can only be operated
with the hand control. The turning motors lock in position
when not used.
The bars are raised and lowered manually.
During operation, the bars must always be
horizontal in the highest or lowest position.
Remember to slacken the turning sheet by pressing the
or button before raising the bar.
Should the turning sheet be too loose on one side, you can
tighten the sheet by pressing
+
simultaneously or
+
simultaneously.
How to use VENDLET Basic
Turning
VENDLET Basic may be used to turn clients. Follow this
procedure to move a client from a supine position to lying on
his/her right side.
1. Turn VENDLET Basic on by double clicking the button.
Press the
button to slacken the turning sheet.
7. The client now lies on his/her right side.
8.
Press the and
button to slacken the sheet before
the client is left unattended in the bed.
The red bar does not necessarily have to be raised. But if this
makes the client or the care giver feel more safe, the red bar
could be raised during the process.
2.
4.
4. Place the left arm of the client on his/her stomach or
chest the moment before he/she starts turning.
5.
6.
6. Then shift the left leg in parallel above the right leg.
7.
2. Raise the blue bar by lifting until it locks in both corner
posts.
3.
Press the
button to tighten the turning sheet on
the blue bar.
5. Immediately after this, guide the right arm of the client
to the side.
