VENCE TUDO SA 7300, Руководство по эксплуатации

Страница: 33 / 59

33
SA - HIDRÁULICA Super Série
fig.14
fig.13
Seed Distribution System - Wheat
A fluted rotor makes the seed distribution. It is assembled on feeder box being driven by
a square axle. It presents the option to slip on this axle, allowing a bigger or smaller quantity of
seeds to be distributed.
Each feeder box has free adjustment through a latch, allowing, this way, adjusting according
to the seed size. The hole closer of the rotor allows the setting of smaller seeds (wheat and forage)
and the farther one of bigger seeds (rice, oats and barley). In addition, the latch allows being
loosening of the holes of setting so that the cleaning of the feeder box can be done.
The displacement of axle (A) (fig. 13) allows doing the setting procedure, thus increasing or
decreasing the work gap the rotors (B) inside the feeder box, being made through the handle (C) (fig.
14). After getting the desired flow of seed, attach the regulator handle through the holding nut (D).
Note the position of the indicator (E) (fig. 13) in millimeter scale (F) to obtain approximate
setting through the indicative tables as the crop to be established.
IMPORTANT
Verify the rotors set that do not force the dislocator supporting in order that gap
adjustment do not be changed.
Do not do the adjustment with the seed box filled.
Do the inspection of distribution by displacement and movement the rotors through
the drive sprocket, observing the efficiency the set.