VENCE TUDO SA 7300, Руководство по эксплуатации

Страница: 25 / 59

25
SA - HIDRÁULICA Super Série
fig.08
fig.06 fig.07
Assembly of the planting lines ( WINTER )
PROCEDURES FOR ASSEMBLY:
1 - Make the change of the row spacing in plane, firm and clean place.
2 - Lift the seeder through the tractor’s hydraulic control.
3 – Lock the seeder putting trestles under the chassis.
4 – Insert the clamping axle (A) (fig.06) the lines making they are together to each other, and
the centerline (B) must have a support (C) for fixing the axle. Always taking care that the lines
nearest to wheeled should be long lines , regardless of the type or number of lines that make
up the seeder.
5 – After assembling of the lines on the supports, lock the clamping axle (A) using the cotter pins
(D) (fig. 07) on their ends.
Assembly of the planting lines with two sections
PROCEDURES FOR ASSEMBLY
For assembling the models in which the kit
of wheat lines is formed by two sections is similar
to the previous one, with certain features:
1- Attach the two central metal plates (E) (fig. 08)
on the center of chassis.
2- Put the clamping axle of the lines in (A) (fig.
06), noting the position of the intermediate support
(C) (fig. 06).
3- Move the first kit line on the chassis.
4- Put the central line (F) (fig. 08), align the
intermediate support (C) (fig. 06) in the line kit.
5- Assemble the second kit in the same way of the
first one.
6- After assembling the planting lines on the
supports, lock the clamping axle (A) (fig. 06) using
the cotter pins (D) (fig. 07) on their ends.