Vemer Thermo GSM Bianco VE715900, Руководство пользователя

Страница: 24 / 40

English
- 22 -
Thermo GSM Digital Thermostat User Manual
Notes:
– it is necessary to separate the words by one or more blanks
– the password field may be omitted if the message sender is a number in
the phonebook (see the procedure for phonebook management below)
– several commands may be included in a single message for maximum of
160 characters (standard text message). The commands will be executed,
only if the reply can be contained in a single text message
– to enter numbers with a decimal part, the separator must be a point
– It is possible to write commands in small letters or capital letters.
If the command is correct, the sender receives a text message reply that has the
same structure of the command with the addition of the symbol “=” that indicates
the current status. For example:
TERMO=ON
Inserting the SIM Card
To remotely control the device with your mobile phone, it is necessary to insert a
SIM card in the specific slot which needs to:
– be enabled for telephone traffic
– have the PIN code request deactivated (to eliminate the request, if necessary, use
a mobile phone)
– have the answering machine disabled (contact the mobile phone operator to
disable the answering machine)
Attention: use only 3V SIM card and standard GSM 11.12 phase 2+.
Turn the SIM card so that the bevelled edge
is towards to the right and the gold-coloured
contacts are facing up, and then slide the SIM card
into the push-push slot (located at the bottom of
the instrument) until it locks into place.
Note: the SIM card can be inserted/removed
even if the instrument is powered on.
The connection status to the GSM network is
displayed with the symbol according to the
following criteria:
ON “fixed” the modem is ON and operates correctly
ON “flashing” the card is not inserted / no GSM coverage / looking for networks