USER GUIDE - VELTIUM LITE
24
EN
Dynamic Power
Control
Measuring device
No
Select
No
if you have no
Dynamic Power Control
measuring
device installed or if you don’t want the charger to regulate the
charge.
CURVE
Select
CURVE
if you have this device for single-phase
installations fitted and connected to the charger.
METER
Select
METER
if you have this device for three-phase
installations fitted and connected to the charger and follow the
instructions on the screen to ensure correct communication
between both elements.
Measurement device location
House
circuit
Select
House circuit
when the measuring device is located in a
circuit that only measures home consumption, but not that of
the charger.
General
circuit
Select
General circuit
when the measuring device is located in
a circuit that measures the total consumption of both your
home and the charger.
Contracted power
Select the contracted or available power supply for your home; under no
circumstances must this supply be greater than the aggregate consumption of
your home and your electric vehicle.
Only in LITE Uno and LITE Kubo chargers.
The
Dynamic Power Control
feature regulates your vehicle charge according to
your home consumption at any given time, thereby ensuring that the total charge
(home and vehicle) never exceeds the contracted/available power supply.
To enable this function you must define the following:
Communications
Select the mode in which the charger will connect to the Internet to enable real-
time remote communication with the VELTIUM App:
WI-FI:
Press the
Connect
button and follow these steps:
The VELTIUM App will search the charger for WI-FI networks visible to the
device. To do othis, the App will display a window with the message
Device
for use with VELTIUM WF_XXXXXXXX
where you must press
CONNECT
.
Next, the VELTIUM App will display the list of visible WI-FI networks,
showing their signal strength and protection level. Select the WI-FI network
to which you want the charger to connect. If the network is protected, type
the password into the window displayed and press
CONNECT
.
The VELTIUM App will automatically proceed with the necessary actions to
connect the charger to the selected WI-FI network. Once the process is
complete, you must press
Finish
.
Only in LITE Uno and
LITE Kubo chargers
Содержание LITE Zero
Страница 1: ...ES GUÍA DE USUARIO EN USER GUIDE PT GUIA DO UTILIZADOR v 1 01 ...
Страница 44: ...www veltium com ...
