5
/
16
Installing Your Front Wheel
1)
Insert the front wheel in between the front fork on the bike. Be sure the fork is resting on the
outside of the axle.
2)
Align the disk between the brake caliper as shown in Figure 2.
3)
Insert the skewer into the wheel axle as seen shown. Keep the spring, cam follower, and lever
on the
LEFT
side, nearest the disk brake. Keep the adjustment nut and spring on the
RIGHT
side. (See Figure 2)
4)
Screw the skewer into the end nut until almost tight.
5)
Lift the lever up until parallel with the front fork. You should feel the axle tighten into the front
forks. Your front wheel is now installed.
Figure 1
Figure 2
Bike Rear
Bike Front
Brake Caliper
and Disc Brake
on left side of
bike
—Front Fork
