Chapter 1: Introduction
Microscan MS-3 Laser Scanner Device Driver User Guide
18
3.
Some software device drivers only
. Set the
Approach height
and
Allowed/prohibited labware
. Follow the procedure in “Setting
general properties” on page 16.
4.
Set the
Barcode Readers
location. Follow the procedure in “Setting
barcode location” on page 17.
5.
Assign the
Labware
used by the location by selecting the correct
labware type from the list.
6.
In the
Device
Properties
, select the desired profile if it is not already
selected.
7.
Select
File
>
Device File
>
Save
to save the changes to the device file.
Setting the Use
linked location
Currently, this feature is enabled for the special situations in which there
is a storage device such as a PlateHub Carousel, StoreX, or Cytomat and
a robot, such as the Velocity11 Translator robot that is shuttling plates
between systems.
To use this feature, select yes and then select the device location to
which you want to link. This tells the software that the current device
location is the same physical location as the device selected from the
Device to use list.
Note:
Selecting this option when it is not enabled will have no effect on
the system.
Related topics
For information about...
See...
Device drivers
“About device drivers” on page 7
Installing a device driver plug-in
“Installing device drivers” on page 9
Profiles
“About profiles” on page 15
Adding a device to the device
manager
“Adding devices” on page 10
Opening diagnostics
“Opening diagnostics” on page 12
