Velocity Cruz T410, Руководство пользователя

Страница: 16 / 44

16
Getting Started
VI. EMAIL SET UP
The pre-installed Email app is a simple but effective email client for both
POP3 and IMAP email services. Configuration is automatic for some email
services. For those that are auto-configured, you only need to enter the email
address and password then tap “next.” You may want to check the box that
reads “Send email from this account by default.” If this does not work, you’ll
need to manually configure your account.
Manually Configuring
You will need detailed email configuration information which is available from
your service provider. You may have to locate the server settings information
at your Email Provider’s support website, or you may need to call their
support line. Unfortunately Velocity Micro cannot provide assistance with this
step. Below is the information you will need:
SERVER TYPE
You must select POP3, IMAP, or Exchange according to your email service
provider’s instructions. Typically this is POP3, but many are now allowing for
IMAP service. If you need to connect to an Exchange server, contact your
business systems Network Administrator for assistance.
USERNAME
This must be either your email alias (the part in front of the “@”) or your full
email address.
PASSWORD
The password is case-sensitive.
NOTE:
You will set up your initial email during your fi rst
boot-up. Follow these instructions to set up other accounts.