1
Unpacking:
Thank you for purchasing Gene350 (Beam+Wash+Spot) fixture. Every unit has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit
has arrived intact. In the case damage has been found or parts are missing, please contact the manufacturer or your dealer for further
instructions. Do not return this unit to your dealer without first contacting.
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING THE
FIXTURE. SAVE IT FOR FUTURE REFERENCE.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void your manufactures
warranty. In the unlikely event your unit may require service please contact the manufacturer or your dealer.
PLEASE recycle the shipping carton when ever possible.
General Instructions:
To optimize the performance of this product, please read these operating instructions carefully to familiarize you
with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this
unit.
Safety Precautions
⚫
To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
⚫
Do not spill water or other liquids into or on to your unit.
⚫
Be sure that the local power outlet match that of the required voltage for your unit.
⚫
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.
⚫
Disconnect from main power before making any type of connection.
⚫
Do not remove the cover under any conditions. There are no user serviceable parts inside.
⚫
Never operate this unit when it’s cover is removed.
⚫
Never plug this unit in to a dimmer pack.
⚫
Always be sure to mount thi
s unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a
wall.
⚫
Do not attempt to operate this unit, if it becomes damaged.
⚫
This unit is intended for indoor use only; use of this product outdoors voids all warranties.
⚫
During long periods of non-
use, disconnect the unit’s main power.
⚫
Always mount this unit in safe and stable matter.
⚫
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
⚫
Cleaning -
The fixture should be cleaned only as recommended by the manufacturer. See “Cleaning” for details.
⚫
Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
PLEASE
consider that damages caused by manual modifications to the device are not subject to warranty.
