![background image](http://html1.mh-extra.com/html/velleman/high-q-kit-k8051/high-q-kit-k8051_illustrated-assembly-manual_862468017.webp)
17
The LED-display will turn off automatically if the unit has been left idle for a couple of seconds.
To clear all channels :
Press and hold the ‘Select’- button. The LED-readout will flash the upper and lower LED during the ‘clear’-
transmission.
To change the address :
Some Velleman IR kits feature address selection (such as the K8050 15 channel receiver), to increase the # of
available channels or to allow independent operation of different receivers in the same room.
•
Press and hold the ‘Transmit’-button.
•
Briefly press the ‘Select’-button.
The LED-display will indicate the selected channel by turning on the lower LEDs (adress 1), the middle LEDs
(adress 2) or the upper LEDs (adress 3).
•
Press the ‘Select’-button repeatedly while holding the ‘Transmit’-button to
change the channel.
•
Release both buttons to return to idle mode
Operation
1 2 3