![background image](http://html1.mh-extra.com/html/velleman/high-q-kit-k8051/high-q-kit-k8051_illustrated-assembly-manual_862468009.webp)
9
Enclosure preparation
STEP 2
Drawing 7.0 provides a drill pattern for the IR-LED.
•
Close the enclosure with the 2 supplied screws. Mark the centre of the hole to be drilled on the top of the
enclosure (Fig 6.0). Make sure that the centre of the hole is in the middle of the housing and 7mm from
the left hand side (Fig 7.0)
•
Drill the hole with a 5,5mm drill.
Make sure the edges of the holes are completely smooth!
Dia 5.5
7mm
FIG 6.0
FIG 7.0
TOP
BOTTOM