HAA920
19.08.2014 – v. 3
©Velleman nv
32
9.3 Data collection
9.3.1 Using RS232/RS485
•
Plug the included data cable into the RS232/RS485 port
[4]
and connect the
other end to a regular COM port of your PC.
•
Go to “Figure device” (left column) and select “Figure Communications”.
•
Select communication type RS232/485 and set the COM port and BAUD rate
to match those on your computer (refer to the introduction of
§9
).
•
Click “connect”. Continue with
§9.3.4
.
9.3.2 Using TCP/IP
•
Plug a regular Ethernet cable (crossed, not incl.) into the TCP/IP port
[3]
and plug the other end into your PC.
•
Select communication type TCP/IP and set the IP address to match that on your computer (refer to
the introduction of
§9
).
•
Click “connect”. Continue with
§9.3.4
.
9.3.3
Using the USB port
•
This model does not support a direct connection between the USB port
[1]
and a computer.
However it is possible to download data on a USB memory card (not included) to transfer it to a
computer (refer to
§5.10.2.3
).
