CS330 VELLEMAN
1
CS330 – METAL DETECTOR
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the CS330 ! Read this manual carefully before bringing the device into use. We are confident
that this metal detector will provide you with many hours of treasure hunting fun.
2. Description and Controls
TUNE
Allows the user to select the optimum setting, taking into account the prevailing
temperature and soil conditions (includes the on/off).
DISC
Turning this control clockwise has the effect of eliminating (DISCriminating) unwanted
signals caused by e.g. iron.
RETUNE
A push button on the handle that resets the detector to the optimum tuning position.
HEADPHONE SOCKET Using headphones will automatically mute the internal speaker. Use stereo
headphones with a 6.35mm jack plug.
3. Assembly
The CS330 is dismounted to simplify the packaging process. Assemble the device as follows :
1. Loosen the lock nut on the upper stem section and insert the lower stem section (with search head).
2. Adjust the length of the stem and coil the lead of the search head lead loosely along the stem to prevent
unwanted signals.
3. Tighten the lock nut.
4. Adjust the angle of the search head and fix it in the desired position by tightening the knob on the search head.
Note : All nuts and screws on the detector should only be tightened by hand as tools may damage the device.
4. Batteries
The CS330 is powered by two (9V) batteries. We recommend using the alkaline long-life type.
1. Remove the battery compartment cover by sliding it downwards towards the search head.
2. Connect the batteries with the battery clips and place the batteries in the compartment. Mind the polarity !
3. Replace the cover : slide the cover upwards until it clicks into position.
