Velleman CCTVPROM18, Быстрое руководство по установке

Страница: 4 / 60

CCTVPROM18
V. 02.1 – 30/01/2014 4 ©Velleman nv
Not included:
 hard disk: HD500GB/S, HD1TB/S & HD2TB/S
 VGA & DVI monitor: MONSCA4N1
 computer mouse.
5. Overview
Refer to the illustrations on page 2 of this manual.
Front panel
LED indications
HDD
Reading or recording activities on the hard disk.
ALARM An alarm was triggered.
TIMER Timed recording is enabled.
PLAY The DVR is in playing mode.
POWER DVR power is on.
Navigation
button
In settings mode:
 Press
▲
/
▼
/
◄
/
►
to move the cursor accordingly.
 When changing a setting, press + or – to increase or decrease the setting.
In playback mode:
 Press

to pause playback.
 Press

to stop playback.
 Press

to fast forward.
 Press

to fast rewind.
MENU Press to enter the main menu.
ENTER Press to confirm settings.
LIST
List the information of the recorded files.
QUICK SEARCH / RECORD / MOTION / ALARM / TIMER / FULL LIST
PLAY Press to play the recorded video.
SLOW In playback mode, press to play the recorded file slowly.
ZOOM In live or playback mode, press to enlarge the image of the selected channel.
SEQ Press to show all screens sequentially in full screen mode. Press again to quit.
4CH: Press to show the 4 channel display mode.
1–4 Press a button to select the corresponding channel.
AUDIO
= SLOW + ZOOM
Press SLOW and ZOOM simultaneously to select live or play-back sounds.
P.T.Z.
= SEQ +
Press SLOW and simultaneously to enter or exit PTZ control mode.
SEARCH Opens the QUICK SEARCH function.
USB port (2 x) Connect a USB flash drive for video backup to one USB port; connect a USB mouse to the other.
Note: do not connect two USB flash drives or USB mice at the same time.
Rear panel
LAN port Connect the DVR to a local network by plugging a network cable into this port.
VGA Connector for video monitor (not included).
AUDIO IN 4 audio input channels to connect four external audio sources, e.g. from cameras with audio.
AUDIO OUT 1 audio output to connect to an audio device, e.g. a speaker (mono).
VIDEO IN 4 video input channels to connect 4 external video sources, e.g. cameras.
HDMI 1 video output channel to connect the DVR to the main monitor.
EXTERNAL I/O Use a 9-pin DSUB connector to connect external signals, e.g. alarm, PTZ…
19V DC Power supply input