CAMSCC15
19/02/2009 5
©Velleman
®
Components nv
manual for the pin layout. Replacing the connector should
be done by a qualified technician.
•
To adjust the focus of the camera, loose the lock screw
[B]
on the flange adjustment ring
[A]
, turn the ring until
the desired focus is reached and retighten the lock screw
[B]
. Adjusting the focus should be done by a qualified
technician.
7.
Technical Specification
pick-up element
1/3" HR colour CCD image sensor
number of pixels
753 (H) x 582 (V) - PAL
Resolution
500 TV lines
min. illumination
0.11 lux / F2 .0
S/N ratio
> 48dB (AGC off)
electronic shutter
1/50 to 1/100.000 sec
iris mode
AES / VD / DD selectable
video output
1Vpp, 75 ohms
lens mounting
CS or C mount
BLC on/off
white balance
ATW/HOLD selectable
sharpness soft/sharp
power supply
12VDC ± 10% / 100mA regulated
(use PS1205R, not incl.)
dimensions
117 x 60 x 50mm
weight 250g
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulted from (incorrect) use of this device.
For more info concerning this product, please visit our
website
www.velleman.eu
.
The information in this manual is subject to change without
prior notice.
©
COPYRIGHT NOTICE
This manual is copyrighted.
The copyright to this manual is owned by
Velleman Components nv.
All worldwide rights reserved. No part of this manual
may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder
