CAMIP10
16.12.2011
©
Velleman nv
4
6.
Hardware installation and operation
•
Choose a location for the camera, keeping following guidelines in mind:
•
Do not install the camera in locations where extremely high or low temperatures or excessive
vibrations may occur.
•
Avoid mounting the camera near high electro-magnetic fields.
•
Do not aim the camera at the sun or other extremely bright objects.
•
Attach the mounting bracket
[8]
to the wall or ceiling using the 3 included screws. Place the
CAMIP10
on top and secure it with the centre screw
[15]
. Determine the desired angle and
tighten the joint screws.
•
Connect the antenna
[1]
to the antenna connector
[11]
and/or connect a network cable (included)
to the RJ45 jack
[9]
.
Note:
it is possible to connect the camera straight to the RJ45 port of a computer. In this case a
crossed cable (not incl.) should be used and network settings must be configured manually.
•
Plug the DC connector of the power adaptor into the 5VDC input jack
[10]
. Only use the included
adaptor or one with the same specifications.
•
Plug the adaptor into a suitable mains outlet (100~240V AC/50~60Hz).
Notes:
•
It takes about 30s for the camera to initialise.
•
When the image appears out of focus, turn the lens
[5]
to adjust.
7.
Software installation
•
Insert the included CD-ROM into a suitable computer system (not incl.).
System requirements: CPU
≥
2.0 GHz / memory
≥
256MB / network
≥
10 MB / video card
≥
64MB memory / recommended OS: Windows 2000, XP, Vista, 7 or Mac.
Windows
•
Locate the software installer
IPCamSetup.exe
and double click it.
•
Follow the instructions on the screen. Click
Next
to start the software installation.
