EN
-24-
Regulatory instructions should be followed for the connection conditions
of electricity and water distribution facilities. There is absolutely no
technical change in the electrical or water connection of the device itself.
At the installation site, a full-pole cutter with a contact gap of at least
3 mm should be installed.
Instant water heater is a device with protection class I and must be
connected with
a grounded cable
.
We strongly recommend that you avoid electrical and / or plumbing
connections and materials.
This device must be permanently connected to fixed installations.
The
cable cutout must match the installed one.
Grounded water installations cannot take the place of an earthling
line.
After assembly, the electrically conductive parts must be protected so
that they can not be touched.
Note that the connections may be too hot when the device is used for a
while.
Do not use the device during or during a frost event. The water must be
completely fluid before the device is used.
The disassembled device must be stored away from the risk of freezing
due to water remaining inside it and never exposed to frost.
Sudden water heater should be installed in a place free
from frost.
