Veilux VRHD-8-4SDI, Руководство пользователя

Страница: 34 / 37

Veilux VRHD-8-4SDI Operating Instruction & User’s
33
Guide
www.Veilux.net
(2) Configuration of the local storage device
※
There are three software status types.
Active Connected to storage or backup device; currently saving the data.
Online
Only connected to storage or backup device.
Offline Not connected to storage or backup device.
※
There are three hardware status types.
Healthy
Connected to storage or backup device; functions normally.
Warning
Connected to storage or backup device, but error was detected; in this case,
data storing or backup cannot be made (for more information, see the
description below).
Fault
Not connected to storage or backup device; cannot perform data saving or
backup.
1. Fault State: The storage device is completely damaged, and none of the S/W operations
can be performed. The fault state is not related to a DVR problem. The DVR has detected the
fault and stopped the recording.
2. Warning State: The storage device has a physical error that can be corrected by the storage
device or by the DVR. If the error is not taken care of, however, the storage device is likely to
be damaged (and shift to fault state). Backing up data in the corresponding storage device
and replacing the device with a normal one are strongly recommended.
3. If there is an active storage device with a warning or a fault, a message is displayed on the
upper left part of the screen.