Veilux VPIP-D110X, Руководство пользователя

Страница: 24 / 76

Veilux VPIP-D110X / VPIPI-D110X
User’s Guide
Website: www.Veilux.net Phone # 1-800-510-6528
(April 2011)
24
(i.e. the internet), in order to access each unit from outside the local area network, each device must have a
unique RTSP (Real Time Stream Protocol) and HTTP port number. You must also configure your IP sharing
device for
“port forwarding”. This is to enable the IP sharing device to forward packet data with unique port
number (RTSP and HTTP) to unique internal IP address (local IP address). If you only plan to access multiple
units from within a local area network, you do not need to change the RTSP and HTTP port numbers, unless
other IP sharing devices sit in-between the client and the IP video products. For more detailed information
regarding the use of IP sharing device refer to the document [Use of Private IP network using IP-sharing-
device] .
3.2. Connecting to xDSL/Cable Modem
1. Please connect Veilux VPIP-D110X / VPIPI-D110X to PC through Hub and then connect DC power adapter.
2. Install IP-Installer and i-NVR S/W on PC
3. Using IP Installer S/W set up some parameters for communication through IP network
Please refer to the IP installer and i-NVR user
‟s guide.
4. Connect Veilux VPIP-D110X / VPIPI-D110X with ADSL/Cable Modem as Fig.3.2
5. Run i-NVR program and check if you can receive video data when connecting to Veilux VPIP-D110X / VPIPI-
D110X.
Fig. 3-2 Connecting Veilux VPIP-D110X / VPIPI-D110X to ADSL/Cable Modem
When fixed IP address is assigned to the xDSL or Cable modem, follow the same way as assigning IP
address for the case of LAN using IP-installer. To enable the notification of the changed IP address to the
user over e-mail when the IP address is changed in floating IP environment, you have to assign the e-
mail address when user name and password are input using IP-installer. (Management server provides
a convenient way of connecting to your network camera under dynamic IP environment. Please
refer
to the Application note regarding “Management Server” in the CD.)
When connecting Veilux VPIP-D110X / VPIPI-D110X to xDSL or Cable modem, usually regular LAN cable
is required. But since some modems have crossover connections, please contact your service provider
for detailed information.
②