Veilux VPIP-D110X, Руководство пользователя

Страница: 20 / 76

Veilux VPIP-D110X / VPIPI-D110X
User’s Guide
Website: www.Veilux.net Phone # 1-800-510-6528
(April 2011)
20
2.6. Quick Installation Guide
Brief information for rapid installation is provided in this section. For more detailed information you are
recommended to refer to pertinent documentations provided with the product or refer to
Veilux‟s home page
(http://www.Veilux.net)
1. Apply power to Veilux VPIP-D110X / VPIPI-D110X and Connect Veilux VPIP-D110X / VPIPI-D110X to
LAN like the following picture.
Fig. 2-5 Connecting Network camera and PC
2.
Install “IP installer” and “NVXR-64” on your PC.
Detailed information for installing these programs can be found in [IP-
Installer User’s Guide]
and
[NVXR-64
User’s Guide]
, respectively.
3. Assign IP address to Veilux VPIP-D110X / VPIPI-D110X using IP installer.
Identify the type of the network environment and set up IP address. Detailed process of setting up IP
address can be found in [IP-
Installer User’s Guide]
. If network type is xDSL or Cable modem you need
supplementary information provided by your ISP.
4. Connect to Veilux VPIP-D110X / VPIPI-D110X in Administrator Mode for initial parameter set-up.
All parameters are set to factory default state when Veilux VPIP-D110X / VPIPI-D110X are delivered.
You are asked to configure the system for your environment in administration mode. Detailed information
of using administration mode can be found in [ 5. Configuring Veilux VPIP-D110X / VPIPI-D110X in
Administrative Mode] . Among the parameters, the parameters in the following table should be set-up