Veho MUVI Q-1, Руководство пользователя

Страница: 13 / 19

24
The follow me watch allows you to use the drone to film a target automatically, as the drone
will follow the target wearing the GPS watch.
Turning the tracker on/off
Press and hold the Power button for 3 seconds until the red indicator is lit to power on
the watch. After 3 seconds, the green indicator starts blinking, indicating the start-up is
completed.
Press and hold the Power button for 3 seconds until the green indicator goes out to power
off the watch. After 3 seconds, the red indicator goes out, indicating the tracker has turned
off.
7.1 To pair the tracker with the Q-1 Drone
1. Put the tracker watch and Q-1 Drone next to each other.
2. Turn on the tracker and wait for the green indicator to start blinking
3. Press the power button 3 times with a 2 second interval to start pairing
4. Turn on the Q-1 Drone and wait 30 seconds for the pairing process to complete, the
tracker will flash red quickly during pairing (5 times per second)
5. If the pairing fails, the tracker will flash red quickly (10 times per second)
6 If the pairing succeeds, the tracker will alternate between solid and flashing 3 times
while searching for a GPS signal, then solid green once a GPS signal has been acquired.
25
Charging the tracker
To charger the tracker, push the tracker out of the silicone watch and place it in the charging
cradle. Charge the tracker until the red indicator turns solid.
7.2 Indicators on the tracker
Status Red Indicator Green Indicator Comment
Power On On Blinks after 3 seconds Press and hold the power button until
the red led is lit.
Power Off Turns off after 3 secs Off Press and hold the power button until
the green led turns off
Pairing Failed N/A Blinking fast (10 times/second) Turn watch and Q-1 Drone off and
re-start pairing process
Pairing N/A Blinking fast (5 times/second) Waiting for pairing to complete
Searching for GPS N/A Solid/3 blinks/solid/3 blinks… Waiting for GPS signal
GPS Acquired N/A On Ready to use
Abnormal System N/A Off Turn watch and Q-1 Drone off and
re-start pairing process
Low Battery Blinking fast N/A Charge the follow me watch as soon
as possible
Charging Battery Blinking slow N/A N/A
Battery Full On N/A N/A
7.3 Using the tracker in flight
1. Pair the tracker to the Q-1 Drone
2. Calibrate the Q-1 Drone and check it is ready for flight
3. Use switches 1 and 4 to put the Q-1 Drone in Economic mode and GPS mode for take off
4. Once in the air, push switch 4 to the F_M mode position
5. The Q-1 Drone must be less than 100m (330 feet) to start following the tracker. If the
Q-1 Drone is out of range, fly it closer to the tracker, then re-enter follow me mode.
7. Follow Me mode
Charging
contacts
Status
indicator
Power
indicator
Power/
Function Key