Vega VEGAPULS 66 Скачать руководство пользователя страница 5

Страница: 5 / 68

2 For your safety

VEGAPULS 66 • 4 … 20 mA/HART - two-wire

28438-EN-170927

2 For your safety

2.1 Authorised personnel

All operations described in this operating instructions manual must

be carried out only by trained specialist personnel authorised by the

plant operator.
During work on and with the device the required personal protective

equipment must always be worn.

2.2 Appropriate use

VEGAPULS 66 is a sensor for continuous level measurement.
You can find detailed information about the area of application in

chapter "

Product description

Operational reliability is ensured only if the instrument is properly

used according to the specifications in the operating instructions

manual as well as possible supplementary instructions.
For safety and warranty reasons, any invasive work on the device

beyond that described in the operating instructions manual may be

carried out only by personnel authorised by the manufacturer. Arbi-

trary conversions or modifications are explicitly forbidden.

2.3 Warning about incorrect use

Inappropriate or incorrect use of the instrument can give rise to

application-specific hazards, e.g. vessel overfill or damage to system

components through incorrect mounting or adjustment. Thus dam-

age to property, to persons or environmental contamination can be

caused. Also the protective characteristics of the instrument can be

influenced.

2.4 General safety instructions

This is a high-tech instrument requiring the strict observance of stand-

ard regulations and guidelines. The user must take note of the safety

instructions in this operating instructions manual, the country-specific

installation standards as well as all prevailing safety regulations and

accident prevention rules. For safety reasons, only the accessory

specified by the manufacturer must be used.
Depending on the model, the emitting frequencies of all radar sensors

are either in the C or K band range. The low transmitting power lies far

below the internationally permitted limit values. When the instrument

is used correctly, it presents no danger to human health. It may be

operated without restriction outside of closed metallic vessels.
The instrument must only be operated in a technically flawless and

reliable condition. The operator is responsible for the trouble-free

operation of the instrument. When measuring aggressive or corrosive

media that can cause a dangerous situation if the instrument malfunc-

tions, the operator has to implement suitable measures to make sure

the instrument is functioning properly.

Содержание VEGAPULS 66





































































Результаты поиска

Содержание VEGAPULS 66

Отзывы:

Похожие инструкции для VEGAPULS 66

Бренды по названию

Популярные бренды

Vega VEGAPULS 66, Руководство по эксплуатации

Результаты поиска

Содержание VEGAPULS 66

Отзывы:

Похожие инструкции для VEGAPULS 66

Бренды по названию

Популярные бренды